27
In modalità STEREO e DOUBLE può essere collegato all'ingresso di altri altoparlanti amplificati per ottenere un sistema
di rinforzo sonoro più potente.
Suggeriamo di
non
utilizzarlo in modalità DUAL o MONO con le sensibilità di ingresso MIC e MIC-20.
4. RIGHT / CH2 LINK (XLR di uscita bilanciato)
Come sopra, connesso in parallelo con il corrispondente ingresso RIGHT / CH2.
5. STEREO LEFT TOP O MONO A+B TOP SPEAKER OUTPUT
In modalità
STEREO o DUAL
questo connettore SPEAKON invia il segnale amplificato TOP LEFT ad un altoparlante TOP.
In modalità
MONO o DOUBLE
questo connettore SPEAKON invia il segnale amplificato TOP agli altoparlanti TOP A&B
quando questi sono collegati assieme a formare un'unica colonna.
In queste modalità usare sempre il cavo SPEAKON
a 4 fili in dotazione per collegare i TOPS.
Nota: si raccomanda di non connettere nessun altro tipo di altoparlante a questa uscita di potenza dedicata. Utilizzare
sempre un cavo di potenza per connettere gli altoparlanti TOP.
Questo connettore è terminato nel modo seguente:
• PIN 1+ connesso all'uscita POSITIVA del canale SINISTRO dell'amplificatore
• PIN 1- connesso all'uscita NEGATIVA del canale SINISTRO dell'amplificatore
• PIN 2+ connesso all'uscita POSITIVA del canale DESTRO dell'amplificatore
• PIN 2- connesso all'uscita NEGATIVA del canale DESTRO dell'amplificatore
6. STEREO RIGHT TOP SPEAKER OUTPUT
In modalità STEREO o DUAL questo connettore SPEAKON invia il segnale amplificato TOP RIGHT ad un altoparlante TOP.
In modalità MONO o DOUBLE non è usato.
Nota: si raccomanda di non connettere nessun altro tipo di altoparlante a questa uscita di potenza dedicata. Utilizzare
sempre un cavo di potenza per connettere gli altoparlanti TOP.
Questo connettore è terminato nel modo seguente:
• PIN 1+ connesso all'uscita POSITIVA del canale DESTRO dell'amplificatore
• PIN 1- connesso all'uscita NEGATIVA del canale DESTRO dell'amplificatore
• PIN 2+ non collegato
• PIN 2- non collegato
7. DSP EDIT (controllo)
Premendo e ruotando questa manopola si impostano i parametri del DSP (vedi IMPOSTAZIONI DSP più avanti). Tenendolo
premuto mentre si accende il sistema è possibile forzare un reset del DSP ripristinando le impostazioni di fabbrica.
8. LCD Display
Il display mostra lo stato corrente del DSP (preset corrente, attenuazione digitale, livello di ingresso) ed è usato per
accedere ai parametri del DSP.
9. POWER (interruttore di accensione)
L'altoparlante è acceso "ON" quando l'interruttore è nella posizione "I".
NOTA:
Quando si spegne l'impianto sonoro, spegnere per primi gli altoparlanti. Quando si accende l'impianto sonoro,
accendere gli altoparlanti per ultimi.
10. LINE VOLTAGE (selettore tensione di rete)
Questo selettore imposta la tensione di rete della linea elettrica del vostro paese (tipicamente è già impostato di fabbrica
e non è necessario cambiarlo). L'impostazione 115V è per le linee elettriche da 105-120V~ e l'impostazione 230V è per
le linee elettriche da 210-240V~.
ATTENZIONE: UNA SBAGLIATA IMPOSTAZIONE DELLA TENSIONE DI ALIMENTAZIONE PUÒ DANNEGGIARE
SERIAMENTE L'AMPLIFICATORE INTERNO.
11. FUSE (portafusibili)
In questo vano è inserito il fusibile di protezione principale di rete.
ATTENZIONE: RIMPIAZZARE IL FUSIBILE DI PROTEZIONE ESCLUSIVAMENTE CON UN FUSIBILE CON LE MEDESIME
CARATTERISTICHE RIPORTATE SUL PRODOTTO.
SE DOPO LA SOSTITUZIONE, IL FUSIBILE INTERROMPE NUOVAMENTE IL FUNZIONAMENTO DELL'APPARATO, NON
INSISTERE E CONTATTARE IL SERVIZIO ASSISTENZA PROEL.
12. AC~ (presa di alimentazione di rete)
In questa presa va inserito il cavo di alimentazione di rete dell'altoparlante. Si raccomanda di utilizzare esclusivamente
il cavo di alimentazione in dotazione all'altoparlante. Accertarsi che l'altoparlante sia spento prima di inserire il cavo di
alimentazione nella presa di corrente.
Summary of Contents for SESSION4
