5
INTRODUCTION
Thank you for choosing a PROEL product. Please take some time to read this manual to understand all the
features of your system and take advantage of all its performance capabilities. All PROEL products are CE
approved and designed for continuous use in professional applications.
DESCRIPTION
SESSION1
is a
portable column system
featuring multiple inputs and a versatile MP3 player with
BLUETOOTH
connectivity. Hosted in lightweight yet ultra-durable polypropylene cabinets, it is composed by a
column with
four high-definition 2.5” full-range speakers
and a powerful
8” sub-woofer
. The
state-of-the-art electronics
includes a sophisticated pre-amp section with active filtering and dual CLIP LIMITERS, and a powerful 2-channel
400W Class D
power amplifier.
The built-in MEDIA PLAYER is able to play songs from an
SD
card or a
USB MEMORY STICK
, but also from your
smartphone or your tablet thru a
BLUETOOTH
connection, without the need of any cable. The built-in
3-
channel mixer
allows to connect two microphone or line sources and a stereo player, each one with
independent level controls. A digital EFFECT is also available for microphone inputs. With a simple knob is
possible to
optimize
the sound for speech, music or low boost applications, adapting the system to any
situation.
SESSION1
can be used in a variety of applications, ranging from
speech diffusion
and
music playback
to
live
music
and
DJ sets
.
MAIN PANEL OPERATIONS
1.
CH1 / CH2 XLR input
This is a female XLR connector that accepts an XLR plug from any balanced or unbalanced dynamic
microphone or line level device. The XLR input is wired as follows:
Pin 1 = shield or ground
Pin 2 = + positive or "hot"
Pin 3 = - negative or "cold"
2.
CH1 / CH2 JACK input
This is a female JACK connector that accepts a JACK plug from any dynamic balanced or unbalanced
microphone or line level device. The balanced JACK input is wired as follows:
Tip = + positive or "hot"
Ring = - negative or "cold"
Sleeve = shield or ground
The unbalanced JACK input is wired as follows:
Tip = + positive or "hot"
Sleeve = shield or ground
3.
CH1 / CH2 LINE/MIC SWITCH
This switch sets the sensitivity of the channel input between microphone level or line level.
4.
CH1 / CH2 LEVEL
These potentiometers set the level of CH1 / CH2 channels.
5.
CH1 / CH2 EFFECT
These potentiometers set the level of CH1 / CH2 channels delay effect.
6.
LINE OUT (XLR)
This male XLR connector provides a balanced line-level signal with the mix of the inputs picked up before
the MASTER controls. Connect it to the input of another audio system or powered speaker.
