PROEL PLLEDSPAR12, User Manual

Page: 8 / 16

8
1. UNPACKING
Thank you for purchasing the SLIM PAR 12. Every SLIM PAR 12 has been thoroughly tested
and has been shipped in perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears to be damaged,
carefully inspect your fixture for any damage and be sure all equipment necessary to
operate the unit has arrived intact. In the event damage has been found or parts are missing,
please contact our customer support number for further instructions.
2. SAFETY INSTRUCTIONS
WARNING!!!
To reduce the risk of fire, electric shock, or injury to
persons, follow these important safety instructions:
This product is intended for indoor use only!
Always turn off, unplug power and allow fixture to cool before servicing.
Ensure that fixture is properly grounded.
Please keep this User Guide for future consultation.
Always make sure that you are connecting to the proper voltage and that the line voltage
you are connecting to is not higher than that stated on decal or rear panel of the fixture.
To prevent risk of fire or shock, do not expose fixture to rain or moisture.
The unit must be installed in a location with adequate ventilation, at least 50cm from
adjacent surfaces. Be sure no ventilation slots are blocked.
Always disconnect from power before servicing or replacing fuse.
Make sure power cord is never crimped or damaged.
Do not look into the beam from a distance of less than 40 cm (16 inches).
Do not stare into the beam for extended periods at a short distance.
3. FEATURES
•
RGBW color mixing
•
Strobe effect
•
Dimmer 0-100%
•
Integrated microphone
•
DMX-512 protocol
•
DMX: 1 – 4 – 5 – 8 channels
•
4 operating modes: Sound mode, remote controller, Master / Slave mode, DMX mode.
•
Digital Display for Address and Function Setting
•
IP rating: IP20