14
Dipswitches
1 ON 2 ON 3 ON 4 ON 5 ON 6 ON 7 ON 8 ON 9 ON
Value
1
2
4
8
16
32
64
128
256
Each LED PAR needs four loops of DMX-512 to control, the table of
the loop control function. The relative functions are described in the
following tab:
CHANNEL
FUNCTION
1
0 – 255 red LED luminance control
2
0 – 255 green LED luminance control
3
0 – 255 blue LED luminance control.
1
0 – 189 Dimmer
190 – 255 Flash speed
When you have several LED PAR connected all together, remember
that each spotlight takes 4 channels, so the first one address code
should be set as 1, the second one as 5, the third one as 9 and so
on.
For all installation, having long
signal cables or in the presence of
electrical noise, for example a
discotheque, it is recommended
practice to use a DMX terminator:
this assist in preventing corruption
of the digital control signal by
external noise.
The DMX terminator is simply an XLR connector with a 120
Ω
(Ohm)
