10
lamp do not touch the lamp globe. The lamp shall be firmly planted to
avoid bad connection and damage to the circuit.
MAINTENANCE
Clean the machine, lens, machine interior and computer board regularly.
Fasten the screws and nuts in the hoisting parts and the racks regularly.
Replace lamps according to the actual situation. Do not use inferior
quality lamps.
TROUBLE SHOOTING
The lamp does not work
•
Check whether the power supplied is 230 V AC and whether the
fuse is burnout.
•
The lamp is not cool enough. Let it cooled down.
•
The lamp is in over heat protection status due high interior
temperature. Check whether the fan and the air duct are blocked.
•
Inferior or aged lamp. Replace the lamp.
•
Igniter degradation or poor contact. Replace according to the original
circuit.
•
Ballast damaged.
The motors do not work correctly
•
Check whether the power supplied is 230 V AC and whether the use
is blown.
•
Check whether the motor lines or connecting lines are degraded or
broken.
•
Check whether the small flange screws for mechanical fastening is
loose, poor in contact, aged or blown.
•
Check whether the output voltage of the transformer is normal.
