The device is not for domestic use and must be installed by qualified ENGINEERS/TECHNICIANS only.
Always disconnect the device from the mains before replacing the lamp.
The device must always be equipped with an efficient ground connection.
the safety of the device is only guaranteed if the instructions below are observed: the
instructions must therefore be kept.
The symbol
on the label indicates the minimum distance to be kept between the device and the lit
object. The lamp must be replaced if it has been damaged or warped by heat. The glass must be
replaced if it is visibly damaged and therefore operating with reduced efficiency.
230V~50Hz
GY 9,5
THE DEVICE MUST NOT BE INSTALLED ON NORMAL INFLAMMABLE SURFACES WITH A 500W
LAMP.
THE DEVICE MUST BE INSTALLED ON NORMAL INFLAMMABLE SURFACES WITH A 300 W LAMP.
WARNING:
WARNING:
POWER SUPPLY:
CAPACITY:
LAMP ATTACHMENT:
LAMP:
ONLY USE LAMPS WHICH COMPLY WITH SHEET N° 3255-EN60357.
MAX 500 W LAMP
300W OR 500W HALOGEN LAMP
1m
F
F
THEATRE PROJECTOR 300W / 500W
FOR P/C LENS - PLFT50P
FOR FRESNEL LENS - PLFT50F
UK
*
Knob for beam angle adjust
*
