19
•
The PLAB4ML Blinder moving head uses core XLR outlet
(plug). A transfer line from 5 core to 3 core will be needed if the
controller you use is 5 core outlet (plug). (Please refer to
Appendix 1).
•
When power is on, the equipment will undertake self-
examination, and can undertake operation after the self-
examination is finished.
•
Please don’t shake the equipment when it is in operation.
CONTROL CHANNELS
The PLAB4ML Blinder moving head uses international standard
DMX512 signal. There are 6 control channels and the detailed
information of control is as follow:
Channel
DMX value
Control
1
DIMMER
0 - 255
0 – 100%
2
STROBE
0 - 255
slow - fast
3
PAN
0 - 255
0 – 540°
4
TILT
0 - 255
0 – 180°
5
PAN fine
0 - 255
16 Bit
6
TILT fine
0 - 255
16 Bit
APPENDIX 1:
The transformation between 3 core and 5
core XLR plug
3 pin (female)
PIN1: GND
PIN2:
PIN3: Signal -
3 pin (male)
PIN1: GND
PIN2:
PIN3: Signal -
