4. INSTALLATION
ATTENTION:
•
Don’t place this unit over vibration subject surface or exposed to
moisture. Avoid direct sunlight too.
•
For the installation revert to qualifier technician to avoid damages
to the unit
•
Ensure that main power supply is matching with the unit power
supply. Use plug with grounding connections
•
Connect power cord before powering the unit . Switch off the unit
before disconnecting the power cord
•
To power the unit, connect in position 18 of
fig.2
, the power cord
included in the unit package
5. DC P0WER SUPPLY
Attention
•
Do not use contemporaneously the main power supply (230 Vac)
and DC power supply (24 V dc) to ensure a good unit operating .
To access to DC POWER SUPPLY 24 V dc (
fig.2
), unscrew to
remove the unit protection cover .
To ensure the proper power supply and to avoid the unit overheat,
use cables with section at least of 2,5 mm
2
.
Note
In case 24 Vdc is supplied Throughout batteries, the unit is nor
neither equipped for batteries recharge purposes
6. AUDIO OUTPUT CONNECTIONS
Use an unbalanced connection through Jack 6.3 mm or RCA cable .