Installation
1. A hole should be made in the ceiling panel, in the place where the
CS3TW will be installed. Use the cardboard disk Use the cardboard
disk found on the box as template for the hole.
2.
The output power required can be selected by connecting the input line
to the unit properly. Refer to the following table for a proper connection.
3. Once the electrical connection has been carried out, press the side
spring wings and insert the CS3TW unit in the hole made previously,
then release the spring wings, which will firmly support the whole
apparatus.
Line voltage
Imp.
Output power
1,66 K
Ω
6 W
3,3 K
Ω
3 W
100 V
6,6 K
Ω
1.5 W
816
Ω
6 W
1,66 K
Ω
3 W
70 V
3,3 K
Ω
1.5 W
416
Ω
6 W
816
Ω
3 W
50 V
1,66 K
Ω
1.5 W
