16. INSTALLATION
Note
•
To allow normal cooling of terminal parts, ensure to install the
amplifier in a habitat correctly ventilated far away from heat
sources and avoid direct exposition to sun rays.
•
Do not install the unit in ambient with vibration risks .
•
When the power amplifier is installed in a rack, ensure that this
rack is complying with EN 60439-1 standards and that the
ventilation of rear rack panel is perfect .
.
The unit is supplied with rubber feet to ensure a good plan stability .
17. CONNECTIONS
Attention
•
For connections revert to authorized installer to avoid to damage
the unit .
•
Plug to the main AC power before ON status selection and unplug
after OFF status selection
To connect the unit to the main power insert in position 21
fig.2
, the cable
supplied in the power unit package.
18. DC POWER SUPPLY
Attentino
•
Advice: do not use contemporaneously the main power supply
(230Vac) and (24 Vdc) power emergency supply to ensure the
good apparatus operating
•
To access to 24Vdc Terminal connections (
fig.2
) unscrew to
remove the cover.
In order to supply in the right way and avoid to overheat , use only
cable with at least a section of 2,5 mm
2
.