PROEL ARTIA Series, User Manual, Page: 3 / 8

DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT
This marking shown on the product or its literature, indicates
that it should not be disposed with other household wastes at
the end of its working life. To prevent possible harm to the
enviroment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take
this item for environmentally safe recycling. Business users should
contact their supplier and check the terms an d conditions of the
purchase contract. This product should not be mixed with other
commercial wastes for disposal.
GENERAL SAFETY INSTRUCTIONS
Proel S.p.A. declines any liability for damages to objects or persons
caused by lack of maintenance, improper use, installation not performed
with safety precautions and at the state of the art.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
EN54-24 CERTIFICATION
The product is in compliance with EN54 - 24:2008 standard.
CE CONFORMITY
The product is in compliance with CE Directive LVD 2014 / 35 / CE as
stated in EN 60065 standard.
DESCRIPTION
AIW50T is an elegant indoor wall speaker featuring an ABS injected
frame and an epoxy coated aluminium grid. It is equipped with a 127
mm (5”) woofer and a 1” dome tweeter, providing a wide frequency
response with a natural, smooth sound reproduction, ideal for the use in
PA systems and in background music applications.
AIW50T includes a transformer to operate on constant voltage 100V and
70V systems with three different power taps. In compliance with EN 54
-
24:2008, it incorporates a ceramic terminal block and a thermal fuse and
is, therefore, suitable for the use in voice alarm systems.
AIW50T can be installed flush with the wall on plasterboards or wooden
panels. Using the optional accessory AIW50FRAME the speaker can be
mounted on the surface of concrete or brick walls.
The elegant design provides a cosmetically clean appearance, which
makes this units suited for indoor application in malls, exhibition centres,
railway and bus stations, etc.
TECHNICAL SPECIFICATION
System Type In - Wall Speaker
Drivers 1" tweeter
5" woofer
Rated Noise Power 100h 12 W
Power rating @ 100V 12 / 6 / 3 W
Power rating @ 70V 6 / 3 / 1.5 W
Impedance 850 / 1.7K / 3.4K Ω @ 100V
850 / 1.7K / 3.4K Ω @ 70V
Connector Ceramic Terminal Block
Power selection On Terminal Block
Measure Environment Free field on standard baffle
Frequency Response ( - 10 dB) 90 - 20k Hz
Sensitivity at 1W (1 kHz, 1m /
4m)
89.8 / 77.8 dB
Sensitivity at 1W (Pink Noise
6dB Crest Factor, 1m / 4m)
86.8 / 74.8 dB
Max SPL (Pink Noise 6dB Crest
Factor, 1m / 4m)
96 / 84 dB
Coverage Angle at 500 / 1k / 2k
/ 4k Hz (
- 6dB)
Hor.: 130° / 130° / 120° / 90°
Vert: 130° / 130° / 120° / 90°
Cabinet White (RAL 9016)
Material ABS / Aluminium
Environmental Type A
Protection Degree IP21C
Operating Temperature - 10 ÷ +40 °C (+14 ÷ +104 °F)
Relative humidity < 95%
Dimensions (mm) 280 x 192 x 77 (W x H x D)
Mounting in - wall with 162 x 250 mm hole
or on surface with AIW50FRAME
Weight 1.62 kg (3.57 lb)
Standard Compliance EN54 - 24:2008
Certification 0051 - CPR - 1999
IN-WALL INSTALLATION INSTRUCTIONS
[1] Cut a rectangular hole of 100x200mm in the wall (A).
[2] Connect the speaker line wires to the ceramic terminal (B),
choosing the right power to be sent to the speaker and taking care
to follow the +/
- polarity.
The powers shown on the terminal are referred to a 100V
constant voltage line, in the case of connection to a 70V line,
consider that these values will be halved (÷2).
[3] Remove the speaker grid (C).
[4] Insert the speaker in the hole, then tighten the screws (D).
[5] Put the speaker grid back in place.
SURFACE INSTALLATION INSTRUCTIONS USING AIW50FRAME
[1] Mark on the wall the 4 fixing points (E) for the AIW50FRAME, then
fix it to the wall.
[2] Remove the speaker grid (C).
[3] Remove the fasteners (F) and their long screws (G) from the
speaker unit.
[4] Connect the speaker line wires to the terminator block (B),
choosing the right power to be sent to the speaker and taking care
to follow the +/
- polarity.
The powers shown on the terminal are referred to a 100V
constant voltage line, in the case of connection to a 70V line,
consider that these values will be halved (÷2).
[5] Fix the speaker to the AIW50FRAME using the shorter screws (H)
supplied with the frame.
[6] Put the speaker grid back in place.