PROEL AE300, Operating And Installation Manual, Page: 41 / 50

41
uSD disablement SET Disablement SET
uSD DISABLED Pre-recorded messages on uSD in “disablement”
management module.
uSD disabl. REMOVED Disablement REMOVED
uSD NOT disabled Pre-recorded messages on active uSD (not in
“disablement”) management module.
Dg.In. disablement SET Disablement SET
Dig inputs DISABLED Digital inputs in “disablement” management module.
Dg.In. disabl. REMOVED Disablement REMOVED
Dig inputs NOT disabled Active digital inputs (not in “disablement”)
management module.
Eth disablement SET Disablement SET
Ethernet DISABLED Ethernet network “disablement” management
module.
Eth disabl. REMOVED Disablement REMOVED
Ethernet NOT disabled
Active ethernet network (not in “disablement”)
management module.
FAULT
WARNING
DSP communication
FAIL DSP communication FAULT
unable to comm with DSP DSP communication loss Communication error between the main processor
and DSP audio processor. Contact the service centre
EVENT LOG words LOG detail POP-UP words Event description Action
DSP comm. RESUME DSP comm RESUME
Comm with DSP restored Communication error between the main processor
and DSP audio processor restored.
FAULT
WARNING
Log buffer ERROR Log buffer FAULT
Buffer integrity error Log buffer error Storage error of the Logs system events. Contact the service centre
FAULT
WARNING
SYS WATCHDOG RESET System power ON
SYS RESET BY WATCHDOG Watchdog system reset
Automatic restart after the system block. Contact the service centre
FAULT
WARNING
FLASH DATA FAILURE Data Flash Corrupted
CRC error Data Flash failure The data stored in the internal “Flash” are corrupted,
the CRC calculation revealed an error. Contact the service centre
FLASH DATA RESTORE Data Flash restore
CRC OK The data stored in the internal “Flash” are intact, the
CRC calculation is correct Warn the service centre