23
ENGLISH
Rear panel
Input AMP IN – Output PRE OUT
6.
Standard
confi guration
MAIN IN input
is connected to
PRE OUT output
throughout a
bridge.
It is possible to optimize the
amplifi er signal setting an external
unit ( so as un equalizer processor,
etc..) between the two terminals .
For connections revert to the
following fi g.
TAPE OUT output
7.
AM Antenna or loop input
8.
FM Antenna input
9.
Priority functions activation terminal
10.
When PRIORITY and COM terminal are short circuited, INPUT2, INPUT3, INPUT4 and INPUT5 are automatical-
ly attenuated for the signal present in INPUT1 Priority status.
SIREN Terminal
11.
A tone chime with priority on all signals is generated when the two terminals are short circuited. Siren
volume level can be set from MASTER control
TEL PAGING Input
12.
Set to receive a high level telephone central audio signal (600Ω) (balanced or unbalanced) with priority on
all signals. The signal level is set through GAIN trimmer. The fi xed and EUROBLOCK removal terminals are
then in parallel.
Loudspeaker output line terminal
13.
These Terminals are used for 4Ω, 8Ω, 16Ω, 50 V, 70 V and 100 V loudspeakers connection
Grounding Screw
14.
When there is no grounding on the power socket, such screw allows grounding connection of the mecha-
nical unit parts.
Attention
Grounding Screw connection must be done by qualifi ed person.