background image

 

17

 

 
 

Safe power line use: 

 

Keep firmly the plug and the wall outlet while disconnecting the unit from AC power. 

 

If the unit will not be used for a long period of time, please unplug the power cord from AC power outlet.  

 

To avoid unit power cord damages, please don’t strain the AC power cable and don’t bundle it.  

 

In order to avoid unit power cord damages, please be sure that the power cord is not walked on or pinched by heavy objects.  

 

Unit relocation:  

Before any unit relocation please control the unit is turned off. The power cord must be unplugged by the wall outlet, and all the connections wires 
should be disconnected as well. 

 

Don’t open this unit:  

Don’t attempt to open or to repair this unit by yourself. For any problem solution not described in this owner’s manual, please refer to qualified 
personnel only or consult us or your National Distributor. Any improper operation could result in fire or electric shock. 

 

Damages requiring services: 

 

Don’t attempt to do operations not described in this user’s manual.  

 

In the following cases please refer to an authorized maintenance center or skilled personnel:  

- When the unit works improperly or it doesn’t work at all.  
- If power cord or plug are damaged.  
- If liquid has spilled, or objects have fallen into the unit.  
- The unit has been exposed to rain.  
- The unit doesn’t operate normally o it exhibits a marked change in performance.  
- If the product has dropped or it has been damaged in any way.  

 

Maintenance:  

The user shouldn’t attempt maintenance operation not described in this user’s manual.  Every maintenance operation should be done by qualified 
personnel only.

 

 

 

IMPORTANT SAFETY INSTRUCTIONS:  

 

Install this unit following owner’s manual instructions.  

 

Don’t install, connect or disconnect power supply when the unit is powered, otherwise there’s an high risk of electric shock.  

 

Don’t open the unit, there are no user serviceable parts inside.  

 

If you detect a particular smell from the unit, please immediately turn it off and disconnect the AC power cord.

 

 

 

Don’t block the unit ventilation openings.  

 

Avoid using this unit in overload for a long period.

 

 

 

Don’t force commands (switches, controls, etc.)  

 

 
 

 

 

To obtain good speakers wire contacts, please tighten the screw terminals firmly. 

 

 

For safety reason, don’t defeat the grounding connection. Grounding is useful for user safety. 

 

Use only connectors and accessories suggested by the manufacturer. .  

 

This unit should be placed in a rack (see INSTALLATION) and kept far from:  

¾

 

Wet places  

¾

 

Direct exposure to heat sources (like sun light) 

¾

 

Non properly ventilated places

 

 

Disconnect the power cord during storms or when the unit is not used. 

 

 

   In order to prevent fire and electric shock risks, it’s necessary to keep the unit far from sprinkling and drops. Please don’t put cups, vases or 

other object containing liquids over the unit. In case of interferences from source signal, THD value will raise over 10%. Don’t place this unit in a 
bookshelf o in other places with small room.  

 

PROEL S.P.A. is not responsible for any damage that occurs due to a wrong unit installation. 

 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for ACDT180





























Reviews: