DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT
This marking shown on the product or its literature, indicates
that it should not be disposed with other household wastes at
the end of its working life. To prevent possible harm to the
enviroment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take
this item for environmentally safe recycling. Business users should
contact their supplier and check the terms an d conditions of the
purchase contract. This product should not be mixed with other
commercial wastes for disposal.
GENERAL SAFETY INSTRUCTIONS
Proel S.p.A. declines any liability for damages to objects or persons
caused by lack of maintenance, improper use, installation not performed
with safety precautions and at the state of the art.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
EN54-24 CERTIFICATION
The product is in compliance with EN54
-
24:2008 standard.
CE CONFORMITY
The product is in compliance with CE Directive LVD 2014 / 35 / CE as
stated in EN 60065 standard.
DESCRIPTION
AC60T
is a ceiling speaker featuring an ABS injected frame and an epoxy
coated aluminum grid. It is equipped with a 154 mm (6”) dual
-
cone full
-
range speaker, able to provide an excellent speech intelligibility with
wide dispersion, together with a good background music reproduction.
AC60T includes a transformer to operate on 100V and 70V constant
voltage systems with three different power taps. In compliance with EN
54
-
24:2008, it includes a ceramic terminal block and a thermal fuse and
it is, therefore, suitable for the use in voice alarm systems.
A simple spring system significantly reduces the installation time, while
the elegant design provides a cosmetically clean appearance, which
makes this units suited for indoor application in malls, exhibition centres,
railway and bus stations, etc.
FREQUENCY RESPONSE
POLAR RESPONSE
TECHNICAL SPECIFICATION
System Type
Ceiling Speaker
Drivers
6" dual cone full range
Rated Noise Power 100h
12 W
Power rating @ 100V
12 / 6 / 3 W
Power rating @ 70V
6 / 3 / 1.5 W
Impedance
850 / 1.7K / 3.4K Ω @ 100V
850 / 1.7K / 3.4K Ω @ 70V
Connector
Ceramic Terminal Block
Power selection
On Terminal Block
Measure Environment
Free field on standard baffle
Frequency Response (
-
10 dB)
120
-
20k Hz
Sensitivity at 1W (1 kHz, 1m /
4m)
94.5 / 82.5 dB
Sensitivity at 1W (Pink Noise
6dB Crest Factor, 1m / 4m)
91.5 / 79.5 dB
Max SPL (Pink Noise 6dB Crest
Factor, 1m / 4m)
101.4 / 89.4 dB
Coverage Angle at 500 / 1k / 2k
/ 4k Hz (
-
6dB)
Hor.: 180° / 180° / 160° / 60°
Vert: 180° / 180° / 160° / 60°
Cabinet
White (RAL 9016)
Material
ABS / Aluminium
Environmental Type
A
Protection Degree
IP21C
Operating Temperature
-
10 ÷ +40 °C (+14 ÷ +104 °F)
Relative humidity
< 95%
Dimensions (mm)
186 x 74 (ø x D)
Mounting
ø 166 cut out
Weight
0.81 Kg (1.79 lb)
Standard Compliance
EN54
-
24:2008
Certification
0051
-
CPR
-
1997
INSTALLATION INSTRUCTIONS
[1]
Cut a 166mm diameter circular hole on the panel where the
speakers has to be installed (A).
[2]
Remove the protection cloth to access the ceramic terminal.
[3]
Connect the speaker line wires to the ceramic terminal (B),
choosing the right power to be sent to the speaker and taking care
to follow the +/
-
polarity.
WARNING:
The powers shown on the terminal are referred to
a 100V constant voltage line, in the case of connection to a 70V
line, consider that these values will be halved (÷2)
.
[4]
Put back in place the protection cloth.
[5]
Raise the support springs (C).
[6]
Insert the loudspeaker into the hole and release the springs (D).