No contractual pictures
Copyright © 2012 IPE Music
-2-
2 – Connections
To ensure the proper implementation of your monitor system, please adhere to the following
procedures at all times:
1.
Check your audio lead.
2.
Switch on the other equipment you intend to use (audio mixer, PC, audio source, etc.)
3.
Check your monitor settings and the settings of your audio sources (lowest volume).
4.
Check the voltage
, switch on the Prodipe monitors by putting switch
in the ON
position and the blue LED
will light up.
Note that:
when you want to shut everything down, the Prodipe monitors must be switched
off first (Switch
in the OFF position and the blue LED
off).
Careful:
choosing the 'AC Select'
voltage depends on your power supply. You should
make any changes when the system has been switched off (Switch
in the OFF position
and the power supply lead unplugged).
Pro 5V2
Pro 8V2
Pro 10SV2
SOURCE
100V –
120V
220V –
240V
100V –
120V
220V –
240V
100V –
120V
220V –
240V
AC SELECT
115V
230V
115V
230V
115V
230V
FUSIBLE
1A
500mA
2A
1A
3.15A
1.6A
Figure 2
3
1
2
4