Manufacturer: Prodigy Aerial Ltd.
5F-1, No.194, Jhouzih St., Neihu District,
Taipei City 11493, Taiwan (R.O.C.)
email: [email protected]
DECLARATION OF CONFORMITY
Prodigy Aerial declares that the products described above conform to the
requirements of Article 19(c) of Regulations(EU) 2016/425 of the European
Parliament and the Council, is under the control of the notified body,
VVUÚ, a.s.(1019), is identical to the PPE which was the subject of the
certification CE of type.
EU type-examination certificate no: 1019-104/Q/2020
According to EN362:2004/B
issued by: VVUÚ, a.s. Pikartská 1337/7, 716 07 Ostrava -Radvanice,
CZ on 20/03/2020
This is the maximum life of the product, subject to detailed conditions,
that the Manufacturer recommends that the product should remain in
service. Metal Products –Indefinite. This may be as little as a single use,
(or even earlier if damaged e.g. in transit or storage prior to first use)
when considering the following criteria: fall arrest, general wear, chemical
contamination, corrosion, mechanical malfunction/ deformation, cracks,
loose rivets, heat contamination (over normal climatic conditions), clear
and readable marking (e.g. marking, batch reference, individual serial
numbers etc).
The anchorage point of your fall arrest system should conform to EN795
(or appropriate International Standard) and be positioned above the user.
All connectors are tested using steel pins of diameter 12mm. Care must
be taken if this connector is likely to be loaded using wide straps(> 12mm
wide) as this may reduce the strength of the connector if loading occurs.
Avoid loading the connector in multiple directions. Avoid side-loading the
connector or loading it over an edge. Manual locking connectors (screw
gate) should be used only where the user does not have to attach and
remove the connector many times during a working day. When using a
captive pin the rope or webbing should be captivated inside the eye.
This equipment is designed for use in normal climatic conditions (-40°C
-+50°C).
LIFESPAN
IN USE
<->xxkN
Minimum Breaking Strength (in kN)
EN362:04B
European Standard
Kxx
Product Code
1019
CE Mark and notified body number
YYXX
-
ZZZZZ (e.g
200100001)
Year of manufacture, Batch Number, Serial
Number
Caution about proper study of manual
instruction
Manufacturer identification
PRODUCTION INSPECTION RECORD
DATE
INSPECTION DETAILS
NAME & SIGNATURE
NEXT EXAMINATION
Prodigy Aerial Ltd
Unit 1 Harbour Way Industrial Estate
Shoreham by Sea, BN43 5HZ
Website://www.prodigyaerial.com
Manufacturer identification
