- 6 -
1. Safety Information
This manual describes the correct use of the product and basic safety instructions. Important instructions in
this manual are marked with this symbol
. When you see this symbol in this manual or stickers on the
product, you must be alert to the possibility of personal injury or death. Be sure to observe the instruction in
the safety message.
The safety messages in this manual do not describe all the possibilities that could cause personal injury,
death or damage to the product. These safety messages are intended to provide basic instructions for safe
operation and service.
Although this manual does not cover all the possible situations, it is the operator’s responsibility to observe
the safety instructions and regulations.
Remember! Safety is up to you.
Safety Alert Symbol
The Safety Alert Symbol represents that
ATTENTION
is involved.
If you see the mark in this manual or on the products, never fail to read and
observe the instructions for safe operation.
Signal Words
The words “
DANGER
”, “
WARNING
”, “
CAUTION
” and “
IMPORTANT
” appeared with the above
Safety Alert
Symbol
indicate degree of risk of hazards or unsafe practices. All four degrees of risk indicate that safety is
involved. Observe precautions indicated whenever you see the
Safety Alert Symbol
, no matter which
signal word appears next to the “Exclamation Point” symbol.
DANGER!
Indicates imminent hazard of a situation that, if not avoided, is very likely to cause
death or extremely serious injury. It may also be used to alert against product that
may exploded or detonate if handled or treated carelessly.
WARNING!
Indicates potential of a hazardous situation that, if not avoided, could result in serious
injury or death. It may also be used to alert against a highly unsafe practice.
CAUTION!
Indicates potential of a hazardous situation that, if not avoided, could result in minor
or moderate injury. It may also be used to alert against a general unsafe practice.
IMPORTANT!
Indicates potential of damages that, if not avoided, could caused to the product or
shorten the product life.
