Procon V3D Series, Programmer'S Manual

Page: 12 / 88

H - I - J
PROGRAMMER’S MANUAL
V8.94.11-
- 12 -
Functions of the push buttons (operating and controlling terminal)

(Escape)
▪
Change between display mode and programming mode
▪
Parameter setting mode: shift the cursor to the left
▪
Repeated push: exit parameter setting mode without saving (until the cursor blinks)
▪
At error display: displaying the cause of the error

▪
Display mode: scrolling the displayed variables downward
▪
Programming mode: moving in the menu downward
▪
Parameter setting: decreasing the value or scrolling the selector switches downward
▪
With selected terminal motor potentiometer: decreasing the reference signal
▪
With enabled motor potentiometer start / stop: Stop

▪
Display mode: scrolling the displayed variables upward
▪
Programming mode: moving in the menu upward
▪
Parameter setting: increasing the value or scrolling the selector switches upward
▪
With selected terminal motor potentiometer: increasing the reference signal
▪
With enabled motor potentiometer start / stop: Start

(Enter)
▪
Programming mode: starting the parameter setting
▪
Parameter setting mode: shift the cursor to the right
▪
Repeated push: save parameter value (until the cursor blinks)
▪
Acknowledgement at error
Programming procedure (operating and controlling terminal)

(Escape)
▪
Changing from display mode to programming mode

▪
Moving between the menu items

(Enter)
▪
Starting parameter setting


▪
Parameter setting

(Enter)
▪
Repeated push: save parameter value (until the cursor blinks)
or

(Escape)
▪
Repeated push: exit parameter setting mode without saving (until the cursor blinks)