Procon Advantage Evo Hardware Installation Manual Download Page 8

 

8

FCC Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two 

conditions: (1) This device may not cause harmful interference, and (2) this device must accept 

any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential installation. This equipment generates 

uses and can radiate radio frequency energy and, if not installed and used in accordance with 

the instructions, may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this equipment does cause 

harmful interference to radio or television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct the interference by one or more of 

the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between theequipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected.

-Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled 

environment. This equipment should be installed and operated with minimum distance 20cm 

between the radiator & your body.  

IC warning statements:

 English: This device complies with Industry Canada license

exempt RSS standard(s). 

Operation is subject to the following two conditions: (1) This device may not cause interference, 

and (2) This device must accept any interference, including interference that may cause 

undesired operation of the device. The digital apparatus complies with Canadian CAN ICES

(B)/NMB

3(B).

 French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux 

appareils

radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil 

ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout 

brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le 

fonctionnement.

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the 

following two conditions:

● This device may not cause interference; and

● This device must accept any interference, including interference that may cause undesired 

operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio 

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:

● l’appareil ne doit pas produire de brouillage;

● l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le 

brouillage est susceptible d’en compromettre le fonctionnement.

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled 

environment. This equipment should be installed and operated with minimum distance 20cm 

between the radiator & your body. 

Cet équipement est conforme Canada limites d'exposition aux radiations dans un 

environnement non contrôlé. Cet équipement doit être installé et utilisé à distance minimum de 

20cm entre le radiateur et votre corps. 

Summary of Contents for Advantage Evo










Reviews: