Backside:
Power connector:
No
Description
Wire-color
1
+9 – 30V DC
Red
2
0V
Black
3
E/A
Green
4
E/A
White
Hardware-installation
1.) Attach WiFi and GPS antennas (WLAN antenna only if access is to take place via WLAN )
2.) Connect the power adapter to the power socket located on the front panel of the device. Then plug the other
end of the power adapter into a power outlet.
3.) Connect to the CONNECT-CONTROL-device wirelessly or use an Ethernet cable.
The associated WIFI SSID and password are located on the underside of the device.
