Page 43
14.2 Battery status indication on the display
Battery is drained. The instrument switches off automatically.
Battery charge is critically low. The instrument should be charged.
Battery charge approx. 50 %
Battery charge approx. 80 %
Battery charge 100 %
The instrument is connected to the battery charger. The charging status is shown
on the battery charger.
14.3 Charging
To charge the battery, connect the
charger to the ZRP 6030+ and a wall
socket (100 - 240 V, 50 - 60 Hz).
The special plug on the battery cable
has a reverse polarity protection. The
ZRP 6030+ can be turned on or off
while charging.
For disconnecting the charger press
the “push button” on the port for
battery charger.
Charging cycle
The charge indicator light on the charger shows the charge of the battery in the
charging cycle:
•
If the indicator is light red, the unit is fast charging. The battery charger is in
constant current mode and the charge current is maximum.
•
If the indicator light is orange, the charging cycle “final charge” is active. The
charger switches to final charge when the battery is approx. 80% charged. The
battery charger is in constant voltage mode.
•
If the indicator light is green, the battery is fully charged.
Always charge the battery completely and only use the supplied charger.
The battery may only be replaced by Proceq or by an authorized Proceq-
agent.
If you have not used your ZRP 6030+ for a longer time, e.g. for several
months, the battery should be charged before using.
Summary of Contents for ZRP 6030+
Page 1: ...ZRP 6030 Retroreflectometer Instruction Manual...
Page 35: ...Page 35 13 Menu 13 1 Menu structure...
Page 51: ......
