Page 1
Page 4
PD2011-9023-01
INSTRUCTIONS
This starLINK infra-red receiver eye is an accessory for use with the
PRO
ception
starLINK remote control extender kit (proSTL1KIT). It allows a further extension
room to be equipped for universal remote control in a household TV signal
distribution system equipped with a
PRO
ception starBOX hub.
Performance data given are typical unless otherwise stated. Proception Limited reserves the right to change
product designs and specifications without prior notice.
proSTL1EYE
Universal I-R Remote
Control Extender Eye
2-Year Guarantee
This guarantee covers failure of your
PRO
ception product resulting from manufacturing
defect within a period of 2 years from the date of supply to the end-user.
This guarantee does not cover damage to the product caused by abuse, tampering, defective
installation or natural causes such as lightning discharge. Repair or attempted repair, other
than by the manufacturer, will render this guarantee void.
This guarantee does not affect a consumers statutory rights.
Proception Limited,
177-187 Rutland Road
SHEFFIELD
S3 9PT
United Kingdom
Web:
http://www.proception.co.uk/
e-mail: [email protected]
PRO
ception
Compatibility
This eye product is for use with the
PRO
ception starLINK and starBOX systems
only. StarLINK is a wired infra-red re-emission type of remote control extender
and is compatible with the majority of household sound and vision equipment.
StarLINK is not compatible with UK Digital Cable set-top boxes or with B&O
Beolink equipment.
Where remote control is required from multiple extension rooms, the signal
connection between the starLINK base unit and the TV outlet in each room
must
be via a
PRO
ception starBOX RF Hub. StarLINK is not compatible with other types
of return path amplifier and may not be compatible with amplifier bypass kits
from other manufacturers.
Installation notes
Installation with an existing TV
If the extension room already has a TV installed, correctly connected via one of
the extension room outlets of a
PRO
ception starBOX, then adding the starLINK
eye is a very simple procedure:
1. Unplug the aerial lead from the TV and plug it into the female IN connector of
the coupler.
2. Plug the male TV connector of the coupler into the TVs aerial socket via the
short flylead provided.
3. Position the receiver eye on top of the TV, or in a suitable nearby location,
facing toward the seating or TV viewing area of the room.
4. Select a VCR or set-top box channel on the TV and check that remote control
operation of the relevant source equipment is working.
Compatibility disclaimer
Occasionally equipment may be found that cannot be controlled via starLINK. Although we
guarantee that starLINK equipment will perform its intended opto-electronic functions,
PRO
ception cannot guarantee interoperability of this system with every piece of audio or
video equipment on the market. Some known incompatibilities are listed under the heading
Compatibility on Page 1.
PROception
TV
IN
proSTL1EYE
