27
As soon as you release the button, play resumes.
If you search past the beginning or end of a track, the laser pickup will move on
to the previous (or next) track. If you try to search forward past the end of a CD
or program, the laser pickup will stop at the end of the last track. If you try to
search backward past the beginning of a CD or program, the laser pickup will
stop at the beginning of the first track of the disc (or playlist).
Direct Time Access
You may use
time
on the Remote Control to begin play at a specific
time
on the
disc.
1. Select the desired track using either
next
and
previous
or the
numeric keypad
on the Remote Control.
2. Press
time
, then press the numbered buttons corresponding to
when you would like play to begin. (The numbers you select will
appear in the
time
portion of the display.)
3. To begin play at that point, press
play
. (To pause the disc at the
same point, press
pause
instead of
play
. This allows for extremely
precise “cueing up” of a disc when making a recording, for ex-
ample.)
Note: The time you select depends on the selection you’ve made
with the display mode button: elapsed or remaining, CD or track.
For example, if you want to begin play one minute and thirty seconds into track
2, select track 2 by pressing
2
on the remote control. Press
time
, enter
1 3 0
, then
press
play
. (This example assumes that the most recently used display mode was
elapsed time on track
.) If you do not press
play
, the CDD will timeout after ten
seconds (that is, it will “forget” that you had begun to do something, and revert to
normal operation).
Alternatively, you might want to set the CDD to play music for a specific period
of time. Say you’d like to listen to music until the evening news begins in 30 min-
utes. Make sure both the
time on disc
and
time remaining
LEDs are on (indicat-
ing
time remaining on disc
, the default display mode when in
stop
); press
time
;
enter
3 0 0 0
; and press
play
. This sequence will direct the CDD to a point 30
minutes from the end of the disc, and engage play at that point. When the music
ends, you will know it is time to turn on the news.
Repeat Disc
To repeat (continuously) all tracks on a CD, press
repeat
until the
disc repeat
LED is lit. To return to normal play, press
repeat
again two more times (to cycle
through
track repeat
to normal
play
). Pressing
stop
will also restore the CDD to
normal (non-repeating) operation.
Repeat Track
To repeat (continuously) the track in (normal) play, press
repeat
twice (to cycle
through
disc repeat
to
track repeat
)
.
While the track repeat function is active, the
LED above the button is lit.
This feature is helpful (for example) when trying to learn how to play a particular
song by playing along with the disc. To learn sections of the song, you may want
to use the Repeat A-B function described below. Once you have most of the sec-
tions learned, you can put them together with a track repeat.
