17
7
SPEAKER OUTPUTS & BINDING POSTS
The Proceed amplifier is equipped with gold-plated, high-current binding
posts for output termination to a loudspeaker system. To take full advantage
of the AMP’s sonic quality, we recommend using high-quality speaker cable;
see your Proceed dealer.
Caution!
NEVER connect the amplifier output terminals to any device
other than a loudspeaker.
NEVER short-circuit the amplifier’s output terminals.
There are two recommended methods for connecting speaker cables to the
amplifier. A high-quality spade lug or hook lug, soldered to the cable (or
crimped with extremely high pressure), is best.
Spade lug
Hook lug
For each channel in turn, connect the left-channel
–
(negative or black) out-
put post of the amplifier to the
–
(negative or black) input terminal of the
appropriate loudspeaker.
Then connect the
+
(positive or red) output post of the amplifier to the
+
(positive or red) input terminal of the appropriate loudspeaker.
Repeat this procedure for all remaining channels.
