Probuilder 18096, Instruction Manual

Page: 42 / 103

42
Troubleshooting
The motor runs, but the drum does not
rotate.
Check that the drive belt gives around 5
mm when you press it together. If it is too
tight or too loose, tighten or slacken it by
loosening the two screws on the rear of the
motor housing.
The motor hums, but the drum does not
rotate.
Check that the gearwheel is not blocked.
Check that the drive belt is suffi ciently taut,
and that it has not broken.
The motor will not start
Check that the concrete mixer is correctly
plugged in to a functional power socket.
Check that the motor has not switched off
due to overheating or a power failure.
Check that the ventilation holes are not
blocked.
Check that the cables in the motor housing
have not come out of the terminals.
Service centre
Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• www.schou.com