Adjustments
14 / 25
5100.0018; 5100.0013
V4
GB
4
Adjustments
4.1
Adjustment of TAK-DP (roof and pan profiles)
The adjustable middle part TAK-DP (1) is suitable to prepare any roof or pan profiles (±3%) (see
)
Figure 1
.
Screw the nuts on the outer side at the TAK-DP
≙
slope (%) for roof profile
Figure 2
(see also
Figure A
on
following page)
Screw the nuts on the inner side at the TAK-DP
≙
slope (%) for pan profile
Figure 3
(see also
Figure B
on
following page)
Figure 1
Figure 2
Figure 3
4.1.1
Adjustment roof profile
Loosen both nuts (2) on the outer side at the TAK-DP.
Figure 1
Adjust the slope (e.g. 1%) with the both nuts (3) on the inner side at the TAK-DP.
Figure 2
Slope (e.g. 1%) is viewable and adjustable on the scale (4) and indicator (5).
Figure 3
1 scale line on the scale (4)
≙
0,5 % slope.
Figure 3
Attention
The indicated slope (%) on the scale is only for orientation.
The actually slope (%) must be measured again unconditional on the facing bedding sand!
See Figure
A und A1 on the following pages.
Figure 1
Figure 2
Figure 3
(3)
(2)
(3)
(4)
(1)
(5)
