probst STONEMAGNET SM-600, Operating Instructions Manual

Page: 75 / 130

11/43
The load (stone slab) to be picked up and
transported must be sufficiently rigid.
Otherwise,
risk of breakage can result during
lifting.
Stone slabs may not sag under any
circumstance . Particular attention must be
made for thin and large-format stone slabs.
Generally, the load (stones slab) is only to be
sucked in the
middle , otherwise the load
hangs diagonally under the device which may
cause a breaking of the load - especially
when lifting large stone slabs with a small
suction plate.
Standard suction plates are not suitable for
transporting glass sheets.
DANGER
Suction plates have different loads
Danger from falling loads (stone slabs)
►
Some suction plates installed on the device reduce its load capacity.
The permissible load capacity is specified on each suction plate.
Only suction plates manufactured by PROBST may be used.
►
Exceeding the permissible and specified suction plate load capacity is not
allowed under any circumstance.