probst HVZ-LIGHT, Operating Instructions Manual

Page: 64 / 85

Adjustments 24 / 34
5140.0035 V2 GB
5.4 Adjusting the gripping depth
5.4.1 Laying side
Adjust the gripping depth (laying side) so, that the
steel-lamellas are gripping in the lower
⅓
of the stone
layer (see Fig. 16).
With extremely large stone layers it recommends to adjust the
gripping depth a little lower, so that the steel-lamellas grip in
the lowest range of the stone layer. Otherwise it exist the
danger that the stone layer breaks out.
Fig. 16
Fig. 17
Adjust the distance to ~ 100 – 150 mm from the centre of the
gripping depth adjustment to the outer edge of the stone
layer.
Fig. 18
⅓
J
¼
⅓