5
PROBRITE.COM
Please call 1-844-507-5651 or email [email protected] for further assistance.
4
Visit
www.probrite.com/install
for installation video tutorials and product support
Pre-Installation (continued)
HARDWARE KIT
NOTE:
Hardware
not
shown to actual size.
AA
BB
Part
Description
Quantity
AA
#8-32 x 3/4" philips mounting bracket screw
2
BB
Wire nut
3
CC
Photocell Black Cover Label
1
PACKAGE CONTENTS
Part
Description
Quantity
A
Light fixture
1
B
Conduit entry plug
1
C
Mounting base tightening screw (pre-installed)
2
D
Mounting base plate
1
E
Photocell lens
1
Installation
1
For best results
Wall Mount
1-1/2"
1-1/2"
Round
Octagonal/Square
B
A
E
C
D
NOTE:
Mounting base (D) mounts to recessed
mounted standard junction boxes or to the sur-
face directly. Junction box must be at least 1-1/2
inch in depth for proper installation for recessed
mount application (fig 2).
(fig 2).
2
Shut electric power off
☐
At wall switch verify it is in the off
position (fig 1).
☐
At the main electrical panel turn off
the circuit breaker that supplies power
to the outlet box you are working on
(fig 2).
☐
For screw-in type fuses unscrew the
fuse that supplies power to the outlet
box you are working on (fig 3).
(fig 1).
(fig 2).
(fig 3).
☐
The fixture can be mounted in the
following two ways:
☐
Junction Box Mount
: Use an
junction box to mount the fixture.
☐
Surface Conduit Mount
: The fixture
can also be mounted directly on the
wall surface using conduit entry.
☐
When mounting fixture, for Dusk
to Dawn operation, make sure the
photocell orientation is at the top for
wall mount, in an area that receives
daylight and not too close to reflective
surfaces. When mounting fixture, make
sure the photocell orientation is at the
top for wall mount.
☐
When installing two fixtures on one
switch, make sure the switch is rated
for at least a 1A inductive load.
☐
Do NOT wire to dimming switch.
CC
