ProBreeze PB-H15, Instruction Manual, Page: 7 / 12

English | 6
turn-on press the timer button.
6. To cancel the turn-on timer turn the
heater on and off again using the on/off
switch.
Note: If when setting a turn-on timer the on/
standby button is accidentally pressed then
the heater will turn on in the chosen settings
but the timer will turn off.
If no mode or desired temperature is set the
heater will turn on in the previously set mode
and heat towards the previously set desired
temperature.
Setting a turn-off timer:
1. Ensure the heater is plugged in, the
power socket turned on, and the on/off
switch is set to on.
2. Press the on/standby button to turn the
heater on.
3. Press the timer button to set the desired
time (between 1 and 24 hours) until
heater turn-off. The time is confirmed
when the display stops blinking.
4. Select the desired temperature and
settings prior to heater turn-off. The
tempera- ture is confirmed when the
display stops blinking.
5. The LED display will show the desired
temperature.
6. To check the remaining time prior to
turn-off press the timer button.
7. To cancel the turn-off timer turn the
heater off and on again using the on/off
switch.
Note: Long-press the timer button to quickly
select your desired time until turn-on or
turn-off.
•
Oscillation Button: Activates the
oscillation function to ensure wide and
even heat distribution. A blue light will
show above the oscillation button when
the oscillation function is activated.
•
Mute Function (only available on
Control Panel): To enable the Mute
function on your appliance, press
down simultaneously on the Mode and
Temperature Increase button for about
2 to 3 seconds. You should hear a beep
sound to confirm the activation of the
function.
To disable the Mute function, repeat the
same process as above.
•
Child Lock Function (only available
on Control Panel): To enable the Child
Lock function on your appliance, press
down simultaneously on the Temperature
Increase and Temperature Decrease
button for about 2 to 3 seconds. The
device will sound one beep, after which
the display will blink ‘LC’.
Once the blinking stops, the Child Lock
is official activated.
To disable the Child Lock function, press
down simultaneously on the Temperature
Increase and Temperature Decrease
button for about 2 to 3 seconds. The
device will sound two beeps, after which
the display will blink ‘UN’. Once the
blinking stops, the Child Lock is official
de-activated.
Note: You will only hear the beep sounds
when your appliance is not on mute.