1.
2.
3.
4.
1.
2.
3.
4.
SWITCHING OFF
CLEANING
Turn the power/fan only control dial to
the OFF position.
Turn the temperature control dial
counterclockwise to the lowest
temperature setting.
Turn the oscillation mode button to the
off (O) position.
Remove the plug from the power
socket.
NOTES
Overheat Protection
When the temperature of the heater is
too high, the thermostat will
automatically switch off the power and
the heater will stop working. This may
occur during improper use or certain
environmental conditions. After the
heater has cooled for 10 to 20 minutes,
the heater can be used normally.
Tip-Over Protection
When the heater is knocked over or
tipped onto its side, the safety switch
will automatically cut off the power.
Power will return to normal when the
unit has been placed upright onto an
even surface.
Unplug from the electricity supply
before cleaning.
Clean the exterior surface of the heater
by wiping it with a soft, damp cloth.
To avoid scratching the surface, do
not use any abrasive detergents or
solvents.
Ensure the heater is completely dry
before operating.
5 | English