ProBreeze PB-18, Instruction Manual

Page: 7 / 12

English | 6
Long press the humidity button to view
the current room temperature on the
LED display. After 5 seconds, the LED
display will revert to the current humidity.
• LED display
The numbers on the LED display will
show the current humidity of the room,
the hours set when setting a timer, or the
temperature when the humidity button is
held down. The icons around the
numbers will indicate the fan setting,
mode, and if the child lock is on.
• Timer button
Press the timer button to cycle between
1 – 24 hours, in increments of one hour.
The hours set will be displayed on the
LED display.
When the LED display reads ‘00’, the
timer is turned off, and the indicator will
turn off.
While the appliance is on, set the timer
to turn the appliance off.
While the appliance is in standby mode,
set the timer for the appliance to turn on.
• Fan Speed button
In auto mode, press the fan speed
button to switch between high and low
fan speed. The corresponding indicator
will light up.
• Lock button
Long press the lock button to activate
child lock. All buttons on the appliance
will be locked and the child lock
indicator will be on.
To remove child lock, press the lock
button again. The indicator will turn off.
Child lock will be turned off when the
appliance restarts.
• Note: The appliance will start up in
the mode selected when the unit was
last used. The appliance will not start
if the water tank is not fitted in the unit
correctly. The compressor’s start is
delayed by 3 minutes after the start of
the fan.
Colour Display:
The light will display different colours
according to the ambient humidity of the
environment:
• Blue – Below 45%
• Green – Between 45% and 65%
• Red – Above 65%
Note: The light will also be red if any of the
error codes are displayed on the LED display.
See the ‘error codes’ section for more
information.