3
ASSEMBLY INSTRUCTIONS
UNPACKING
1. Check for any obvious damage to the carton or its contents.
If damage is evident, notify the carrier or your authorized
ProBasics distributor.
2. Remove all loose packing from the carton.
3. Carefully remove all the components from the carton.
IV POLE ASSEMBLY
1. Install caster base with guide pin on caster base with two
holes, placing guide pin in the smaller of the two holes as
shown at right.
2. Install flat washer on bolt. Install bolt through center of both
caster bases into bottom of lower pole.
3. Use wrench to tighten bolt until securely fastened in lower
pole.
4. Install hook assembly on upper pole. Tighten by hand until
secure.
WARNING:
Ensure that IV Pole is assembled as described
before use.
HEIGHT ADJUSTMENT
1. Check for any obvious damage to the carton or its contents.
If damage is evident, notify the carrier or your authorized
ProBasics distributor.
2. Remove all loose packing from the carton.
3. Carefully remove all the components from the carton.
WARNING: POTENTIAL EYE HAZARD.
Maintain a safe
distance from IV hooks.
OPERATION
Check the fit and tightness frequently of all fasteners to ensure
that the IV Pole is securely assembled.
CLEANING
Regular cleaning is recommended. To clean:
1. Gently wipe the IV Pole with a soft, clean cloth dampened
with water and a mild
NON-ABRASIVE
detergent (household
cleaner, soapy water, or hospital grade disinfectant).
2. Rinse IV Pole with a soft, clean cloth dampened with water.
3. Dry IV Pole with a clean, soft cloth.
NOTICE:
DO NOT
wash under water pressure, steam clean, or
use cleansers that could damage the IV Pole’s finish.
MAINTENANCE
1. Firmly hold the upper pole and loosen the collar with
the other hand. Turn counter clockwise to loosen.
2. Adjust the upper pole to the desired height and tighten
the collar. Turn clockwise to tighten.
Summary of Contents for PB5035
Page 1: ...IV Pole 2 Hook 4 Caster...
