6
HBA/RAID Controller Installation
Your EB8PM features a RAID-ready JBOD architecture. This provides the
best support for a wide range of host bus adapters & PCI RAID controllers.
Always follow your HBA/RAID controller’s installation procedure to ensure
proper operation.
WARNING:
Allow a few minutes for the internal
computer compenents to cool down before
opening your computer system.
1.
Touch the metal PCI slot covers on the back
of your computer to discharge any static electricity.
2.
Unplug ALL cables from your computer, and remove
the side access panel according to your system type.
3.
Apple G5 users must first remove the deflector cover
and place it on a clean, safe surface.
NOTE:
Remember to replace the air deflector after you
have finished installing your HBA/RAID controller card.
7
Please follow your HBA/RAID controller’s driver installation notes to ensure
operation & hassle free configuration.
HBA/RAID Controller Installation - Cont’d
1.
Remove the PCI slot cover plate from an available
PCI slot. Consult your HBA or video capture card
for recommended slot postions.
2.
Install & secure your PCI controller card into the slot
and firmly press the card into place.
3.
Close and replace the system panel.
Port access opening
PCI slot
Reinstall the screw
to secure the card
in place.
WARNING:
To minimize the chance of electrical
shock, always follow proper saftey rules when
working with electrical components.
8
Introduction to Port Multiplier Cable Connectors
Port Multiplier Interface Overview
Your EB8PM is equipped with industry standard E-SATA (Port Multiplier)
interface port. Never try to use a non-locking SATA cable with a locking
E-SATA port. When using 3rd. party cables, always double check for proper
connector types.
E-SATA
[Locking Connector]
E-SATA
[Connector View]
E-SATA Locks
Figure 4.
9
Ensure that the connector is properly secured & fastned. Most commom
issues are related to poor cable connection. Do not force the connector into
the port.
Connecting Your EB8PM - Cable Connections
Figure 5.
E-SA
T
A
Do not try to use a SATA
cable with an E-SATA port.
Doing so may damage
your array and disks.
SATA
[Non-locking]
SA
T
A
FULL R
A
NGE
DISKS 1-4
D
ISKS 5-8
Port 1
[Disks 1-4]
Port 2
[Disks 5-8]
E-SA
T
A
E-SA
T
A
EB8PM
Quick start guide
EB8PM | ESATA Storage Array with Port Multiplier Technology
PROAVIO
TM
