MIXER
HANDHELD MIC
1. Unscrew the battery cover at the end of the microphone.
Install the provided two 1.5V AA batteries and then close
the cover. Make sure to connect with the correct polarity.
2. Slide power switch to ON position, power LED indicator
should flash once briefly
indicating
that
the
transmitter
has
sufficient
power
.
If
the
power LED
indicator
stays
on
or does not light at all
,
it
indicates
that
the
battery
has
insufficient
power or dead. Please replace new
battery
.
3. Slide
the
power
switch
to
MUTE
position
to
mute
the
sound.
4
.
If
the
microphone
is
not
going
to
be
used
for
a long
period
of
time
,
please
slide the
power
switch
to
OFF
position
and
remove
the
battery from microphone.
Power/low battery
indicator
Power on/off/
mute switch
Battery cover/
Compartment
1. Power: Press to turn on/off the unit.
2. AUX: To be connected with mobile phone, Tablet or another external audio source.
3. USB/TF port: Enables playing audio from USB (DOK) or SD (TF) cards, this is the
"PLAYER".
4. PLAYER IR Remote Sensor
.
5. PLAYER previous track.
6. PLAYER Play / Pause.
7. PLAYER next track.
8. PLAYER MODE : Choose input of Player in between USB, SD, AUX or Bluetooth.
9. PLAYER LED Display.
10. Selector: Turn to choose Mp3 player, TV or DVD input.
11. Bass control: Turn to adjust bass of music.
12. Treble control: Turn to adjust treble of music.
13. Volume control of music
14. Volume control of wireless microphone/MIC in 1
15. RF1: Light green when wireless microphone 1 is powered on.
16. Volume control of wireless microphone/MIC in 2
17. RF2: Light green when wireless microphone 2 is powered on.
18. TONE: Turn to adjust tone of microphone.
19. ECHO: Turn to adjust echo level.
20. Master volume control
Grille
(Capsule inside)
TX
OUTPUT
INPUT
1
2
3
4 5
6
7
8
9
USB
SD
AUX
Front Panel
Rear Panel
10
11
12
13
14 15 16 17 18
19
20
21. ANT B: Antenna of wireless microphone 2.
22. MIC IN 2: To connect wired dynamic MIC.
23. MIC IN 1: To connect wired dynamic MIC.
24. DVD Input: To be connected to DVD , Streamer, Computer or any other Audio or
A/V source.
25. Cable/TV Input: To be connected to Cable TV output or any other Audio or A/V source.
26. OUTPUT: To be connected to Active Speakers, Hi Fi system, TV or Screens for the
Video out.
27. DC IN: Connect DC end of supplied power adapter here. Connect AC end of power
adapter into a suitable mains power socket.
28. ANT A: Antenna of wireless microphone 1.
29. Channel Switch: Selects one of 3 channels of Wireless Headphones (To buy
separately). Any quantity of Headphones can be operated in 2 different frequencies
at same site.
30. Antenna for DA-601 Headphones.
21
22
23
26
27
28
29
30
24
25
SPECIFICATIONS
A. Overall System
B. Receiver
C. Microphone
Oscillation Mode: Quartz Controlled
Carrier Frequency Range: Fixed permitted
Frequency Stability: 30ppm
Modulation Mode: F3E
Maximum Deviation: +/-35Khz
Audio Dynamic Range: >100dB
S/N: >100dB
Frequency Response: 80~20000Hz at ±3dB
T.H.D: <0.5%
Operating Distance: 30M
Operating Temperature: -20
℃
~50
℃
Mike Capsule: dynamic
Pre-emphasis: 50
μ
s
Antenna: Built-in housing
RF Output: <10mW
Spurious Emission: >40dB
Power Supply: 2x 1.5V AA batteries
Power Dissipation: <250mW
Mirror Image Rejection: >50dB
De-emphasis: 50μs
LINE input sensitivity: 380mV/-8.5dB
MIC input sensitivity: 5mV/-46dB
LINE input impedance: 10K
Ω
MIC input impedance: 8K
Ω
Power Supply: DC18V/500mA
Power Dissipation: <800mW
