SCR-2215sm
STEP 3 - CONNECT LF UNITS
3a.
Connect loudspeaker wires from amplifier LF channel output to either binding post pair on
lower LF unit. Be sure to observe correct polarity.
3b. Repeat process for upper LF unit.
Connect To Woofer (LF) Amplifier Channel Negative Output
Connect To Woofer (LF) Amplifier Channel Positive Output
STEP 4 - CONNECT MF AND HF DRIVER
4a.
Connect loudspeaker wires from amplifier MF channel output directly to OUTER binding post
pair on MF/HF driver. Be sure to observe correct polarity.
4b.
Connect loudspeaker wires from amplifier HF channel output directly to INNER binding post
pair on MF/HF driver. Be sure to observe correct polarity.
Connect To Midrange Amplifier Channel Positive Output
Connect To Midrange Amplifier Channel Negative Output
Connect To Tweeter (HF) Amplifier Channel Negative Output
Connect To Tweeter (HF) Amplifier Channel Positive Output
MF
HF
LF (X 2)
Note: The two pairs of binding posts
on the LF units are wired together
inside the loudspeaker, therefore,
either set may be used, or you may use
all four to increase current capability by
using four wires from your amplifer. If
you use four, connect the two negative
wires together and the two positive
wires together at the amplifier end and
then to the corresponding amplifier
output terminal.
CAUTION: DO NOT CONNECT NEGA-
TIVE AND POSITIVE WIRES TOGETHER.
AMPLIFIER DAMAGE WILL RESULT.
Professional Home Cinema, LLC
dba Pro Audio Technology
5445 Oceanus Drive, Suite 110
Huntington Beach, CA 92649
Tel: 714-890-0418 Tel: 800-272-6085
Fax: 714-890-0536
