User Manual
PA speaker »
HD100T
WARNING! Before carrying out any operations with the unit, carefully read this instruction manual and keep it with cure for future
reference. It contains important information about the installation, usage and maintenance of the unit.
In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the characteristics stated in this instruction manual
at any time and without prior notice. All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it
For further information, please contact our Service Center: tel. +39 0771 72190 fax +39 0771 721955 - [email protected]
Rev001 - 08/12 ©2012 Music & Lights S.r.l. - Italy - www.musiclights.it
EN
Cleaning the unit and maintenance
• Make sure the area below the installation place is free from unwanted per
-
sons during setup
• Switch off the unit, unplug the main cable and wait until the unit has coo ed
down
• All screws used for installing the device and any of its parts should be tightly
fastened and should not be corroded
• Housings, fixations and installation spots (ceiling) should be totally free from
any deformation
• Housings, fixations and installation spots (ceiling, suspensions) should
be totally free from any deformation.
• The interior of the device should be cleaned annually using a vacuum cleaner
or air-jet
Warning: we strongly recommend internal cleaning to be carried out by
qualified personnel!
General Instructions
• The products referred to in this manual conform to the European Community
Directives and are therefore marked with
. • The unit is supplied with haz
-
ardous network voltage (100V~). Leave servicing to skilled personnel only.
Never make any modification on the unit not described in this instruction
manual, otherwise you will risk an electric shock. • Connection must be made
to a power supply system fitted with efficient earthing (Class I appliance ac
-
cording to standard EN 60598-1). It is, moreover, recommended to protect
the supply lines of the unit from indirect contact and/or shorting to earth
by using appropriately sized residual current devices. • The connection to
the main network of electric distribution must be carried out by a qualified
electrical installer. Check that the main frequency and voltage correspond
to those for which the unit is designed as given on the electrical data label.
• Never use the fixture under the following conditions: - in places subject to
excessive humidity; - in places subject to vibrations or bumps; - in places with
a temperature of over 45°C or less than 2°C. • Make certain that no inflam
-
mable liquids, water or metal objects enter the fixture. • Do not dismantle or
modify the fixture. • All work must always be carried out by qualified techni
-
cal personnel. Contact the nearest sales point for an inspection or contact the
manufacturer directly. • If the unit is to be put out of operation definitively,
take it to a local recycling plant for a disposal which is not harmful to the
environment.
Warnings and installation precautions
• Never look directly the beam when it’s lit.
• For inside use only. Not designed for outside use.
• This product in combination with amplifier, may be capable of producing
dangerous sound levels that could cause permanent hearing loss. Do not
operate for a long period of time at high volume level or at a level that is
uncomfortable.
• If this device will be operated in any way different to the one described
in this manual, it may suffer damages and the guarantee becomes void.
Furthermore, any other operation may lead to dangers like short circuit,
burns, electric shock, ect.
• The maximum achievable volume gain depends on the acoustical
environment and positioning of the units.
• Before starting any maintenance work or cleaning the unit, cut off power
from the main supply.
Description and technical specifications
2-way horn coaxial speaker with 6.5” LF driver and 1.5” HF driver, compact size
and high acoustic performance.
• Excellent quality of vocal and music reproduction
• Particularly suitable for use in call or alarm systems in places with high level
of background noise
• ABS body, sand color
•
Solid and compact construction
• Suitable for both indoor and outdoor use
• Weather resistant (IP65)
• Steel fixing base included
Installation
1.
Tightly screw the speaker with the mounting bracket at a suitable place. To
adjust the speaker, release the locking nuts of the bracket, move the speaker
accordingly, and tightener the nuts.
2.
If PA system is switched on, first switch it off completely before connecting it.
3.
Connect the Pa amplifier to the appropriate cores, set the impedance (8 Ohm)
or the power ( LINE 70/100V) by using the selector.
4. With the connection of several speakers observe that all speakers are
polarized in the same way (black core = negative pole).
TECHNICAL DATA
HD100T
Type
2-ways coaxial , LF 6.5" - HF 1"
Applicable power
75W - (IEC long-term) 8Ω 50W with
transformer (2.6-4.5-9-12.5-25-50W)
Speaker Impedance
8 Ohm
Constant voltage
(100 / 70V)
Frequency response
90÷20.000 Hz
Sensitivity
86 dB (1W/1m)
Maximum sound pressure
101 dB
Protection level
IP65
Dimensions (WxHxD)
356x310x305 mm
Weight
4 kg
310 mm
305 mm
356 mm
