PROALL G Series, Operator'S Manual

Page: 34 / 59

MX05001
6-2
Rev.
1
3 March 2022
Cement Powder
IMPORTANT: Care must be taken that no stone,
water, or other foreign material enters the cement
bin. A serious malfunction of the cement feeding
system may result.
The output of cement can be checked on the
computer.
Mix Auger
The mix auger contains many sub-systems that
work together in the mixing process. The
following figure displays the major components of
the mix auger system.
Figure 3. Installed mix auger equipped with drop-away
bottom mat. (1) mix auger, (2) mix bowl, (3) lower link
arm, (4) auger top drive.
The mixing auger receives the gunite materials
through the mix bowl, mixing throughout its
length and discharging the mix through the top of
the auger. The auger position is controlled
through the Mix Auger Paddle and its speed and
direction are controlled using the Operator
Control (refer to page 4-2.)
The auger cover is latched and may be opened for
cleaning. A cover catch holds the cover open
while cleaning by catching the cover handle.
Figure 4. Cover catch.
Figure 5. Auger cover open for cleaning.
WARNING
The exposed mixing auger is extremely
dangerous. The auger ball valve can
prevent the auger from turning.
1
2
3
4