PROALL G Series, Operator'S Manual

Page: 22 / 59

MX05001
4-2
Rev.
1
3 March 2022
Mix Auger Paddle
Table 4. Paddle Table
Mix Auger Control ............................. Paddle
•
Up ............................................ Auger Up
•
Center ............................. No Movement
•
Down .................................. Auger Down
Operator Control
Rotate the Selection Knob until the desired
speed is shown on the mixing computer (refer to the mixer computer manual.) Push the Selection
Knob to accept the value.
Table 5. Speed Control Table
Auger Speed
Function not equipped
Conveyor Speed
Auger Forward
Conveyor Start
Select Knob
•
Push ................... Selection Confirmation
•
Turn ............... Increase/Decrease Speed
6