3
Align the four holes of the laptop workstation
with the C-stand adapter holes and screw
them together.
Note:
The C-stand adapter is attached to the
bottom of the laptop workstation.
Use the Allen key to connect the screws on
the top side to the adapter at the bottom and
then tighten the adapter knob.
Mount the laptop workstation on a c-stand
and tighten the adapter knob to secure it
properly.
Note:
Laptop Workstation can be connected in
different ways: to a tripod ball head via the 1/4″
-20 thread, to the base of your tripod via the
3/8”-16 thread, to a light stand, c-stand, arms
via the 5/8” Baby Junior Pin.
Image showing the laptop mat being fitted to
a workstation.
Note:
The nonslip mat sits on your laptop
workstation, providing an anti-slip, anti-scratch
surface for electronics and more. In addition, its
heat-dispersing air channels help to conduct
heat away from laptops and other hot-running
electronic devices.
Laptop Workstation
Setup
Mount the laptop workstation on the tripod
ball head and secure it with the knob, as
shown in the images.
Attach the quick release plate to the c-stand
adapter and secure it using the Allen Key.
