4
•
Then remove the spring of the Spring
-
cam
Mitchell vibration Isolator.
NOTE:
You can change the quantity of the
spring of the Spring
-
cam Mitchell vibration
Isolator according to your requirement.
•
Manually attach the male Mitchell ring at the
bottom of the slider after placing the
Spring
-
cam Mitchell vibration Isolator on the
mounting part of the slider.
•
Then insert the Mitchell Castle Nut
(Not Included)
with Ronin Mount Clamp
from the top of the Spring
-
cam Mitchell
vibration Isolator and tighten it with the
male Mitchell ring
(Not Included)
at the
bottom of the Spring
-
cam Mitchell vibration
Isolator.
YOUR PROAIM SPRING
-
CAM MITCHELL VIBRATION ISOLATOR
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
