2
8ft Track Aluminum Pipe Kit
Setup
Interconnect the portable track sections.
Loosen the long thumbscrews of the track
ends
(Not included)
, insert the track rails into
them and lock the thumbscrews to secure the
track into position.
Place the dolly platform
(Not included)
onto
the track. The handles part of the dolly
platform
(Not included)
should be inside the
track as shown.
Note:
Make sure all wheels are aligned
correctly on the track, and the dolly runs
smoothly.
Loosen the knob of the break bracket
(Not
included)
, mount it on the side of the dolly
platform
(Not included)
& tighten the knob.
Note:
Track can be used in lengths of 4ft and
8ft, depending on your shot requirements.
Polaris and Flymate Dolly
(Not included)
Compatible with Track as shown in the picture.
Note:
Adjust the position of the break bracket
so it goes under the track to prevent the
platform from tilting.
