2
Loosen the knob of the End Spacers and then
mount them onto the C-Stand
(Not Included)
NOTE: It comes with end-clamps that let you
attach to any compatible speed rail and can be
mounted on C-stands & tripods in seconds,
allowing you to start filming in a flash.
To properly secure the foot to the End Spacer,
tighten it with the help of a knob. Follow the
same process on the other side.
End Spacers Assembly
After mounting the End Spacers onto the
C-stand
(Not Included)
, properly secure them
with the help of the knob. Then remove the
feet by loosening their knobs.
The feet have been properly attached to the
End Spacers, as shown in the image.
Insert washers to the feet after inserting in
the End Spacers.
After removing the knobs of the feet, match
the feet’s bottom threads to the End Spacers’
and insert them in, as shown in the image.
