2
Video Camera Line Slider Setup
Now push the side button of the Fluid Head
and remove the Quick Release Plate, and then
secure your camera on the Quick Release Plate
with the help of a screwdriver.
Now screw-in the fluid head (
Not-Included
)
onto the camera mounting plate of the slider
and tighten the silver knob.
NOTE: If you have 1/4”-20 threaded fluid head
or camera, unscrew the 3/8”-16 screw from the
camera plate and screw in the 1/4”-20 screw.
Attach the feet on both ends and adjust them
as per your requirement.
Insert the Camera Setup on the fluid head and
tighten the knob to secure it properly.
Loosen the silver knob of the camera plate and
Completely remove it from the slider.
