PROAIM KITE-22-WONDER Setup And Operation Manual Download Page 14

PROAIM KITE-22 WONDER PACKAGE 

 

14 

 

Testing Equipment 

 

1. 

Double-check all nuts to make sure they are snug, as they may loosen in transit. 

2. 

Make sure you are on a level surface and have adequate room 

3. 

Fly the jib around some before you mount any equipment on it.  This will allow you to test 

the installation, determine if you are on level ground and you are in proper adjustment. 

4. 

After testing a movement, let go of the arm.  It should slow down and stop without moving 

up, down, left or right after it stops, If not, it is not balanced properly.  Use the lighter counter-

weights, if needed, or readjust your leveling as required. 

5. 

Now you may install your equipment on the arm 

6. 

Balance with the appropriate counter weight as required 

For some interesting compound shots try: 

Moving the pan & tilt control the same direction as you move the rear of the jib.  

This keeps your subject framed but changes the perspective of the camera. 

Example: 

 

Move the pan & tilt head all the way to the left, zoom out w/ subject framed in foreground 

 

Now move your hands to the right (camera swings to the left) while panning the camera right, 

keeping your subject framed. 

 

You can also try this with up and down shots or diagonal shots.  Just remember to move your 

hands the same direction as you pan/tilt the camera. 

WARRANTY 
 

We offer a one year warranty for our products from the date of purchase. 
 
We  will  repair  or  replace  your  product,  free of charge,  in  the event  of a  defect  in  materials  or 
craftsmanship  obtained  during  normal  use  or  handling  based  on  the  user  manual.  Please  note 
that we will not cover any shipping costs for returning the product to us. If any VAT or import 
duties are applied to the return, we will also charge these costs to the customer.  
 
The warranty does not include, by the way of example, damage caused by products that we do-
not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product , 
or service by anyone other than our company.  
 
We are not liable for incidental or consequential damages resulting from the use of the unit or 
occurring due to any breach of this warranty.  

Summary of Contents for KITE-22-WONDER
















Reviews: