5
Mount the end spacers onto the stand
(Not
Included)
and tighten with the help of a
knob.
NOTE: If you need higher level shots, then you
can put end spacers on Stands.
Mount the Centre Support Spacer onto the
stand. After mounting the spacer onto the
stand
(Not Included)
,
properly secure it with a
knob.
Attach the Centre Support spacer under the
centre of the track system help of a
Support stand
(Not Included).
Insert an 8ft track into the clamp. Once the
track is properly fitted into the clamp, secure it
with the help of a knob, as shown in the
image. Follow the same process on the other
side.
After properly securing the fluid head
(Not Included)
, mount a camera on it.
The 8ft track is now mounted on the centre
support spacer.
8ft Track
Setup
