2
ISO Dampener
Setup
Firstly, remove Castle Ring from ISO
Dampener.
NOTE:
The ISO Dampener is flexible enough
so you can easily tilt it up & down on any side.
Safety Hints
ATTENTION: PLEASE READ THIS BEFORE USING TO PREVENT SERIOUS DAMAGE TO THE
GEAR!
DO NOT FORGET TO SECURE THE EQUIPMENT
The Dampener must be carefully locked while setting-up with any equipment.
NEVER LEAVE THE FASTENERS LOOSE
Always tighten the locking knobs properly for giving security to camera setup.
BE HIGHLY VIGILANT OF FRICTION ADJUSTMENT
When you are adjusting either Roll Axis / Pan Axis, make sure that the Friction adjustment of
both dampers must be same.
FOLLOWING THESE GUIDELINES WILL PROVIDE BETTER SHOTS AND TROUBLE-FREE
OPERATION.
SHOULD YOU NEED ADDITIONAL INFORMATION, TECHNICAL ASSISTANCE IS AVAILABLE
‘ONLINE’ BY CONTACTING YOUR SALES REPRESENTATIVE.
Attach ISO Dampener with Vibration Isolator
Plate
(Not Included)
and tighten Castle Ring
from top with the help of Castle Nut Wrench.
