2
Gimbal Tripod Head Setup
Mount and secure the gimbal head on the
tripod.
NOTE:
The gimbal head mounts directly to
tripods with a 3/8′′-16 threaded mount. In
addition to that, we provide you with the
conversion adapter for 1/4″-20 mounting,
making it universally compatible with the
tripods.
After mounting the gimbal head, secure it
correctly with the locking knob.
NOTE:
The head pans 360° while keeping the
horizon straight using the bubble level at the
base of the head. Head has a 360° panoramic
scale that allows easy pan adjustments.
Loosen the locking knob of the gimbal head,
then set the swing arm according to the
shot’s requirement and tighten the knob
back.
NOTE:
The swing arm tilt horizontally and
gives you extreme tilt angles to achieve a
multi-dimensional shot as shown in the image.
Slide the camera plate clamp up and down
by loosening the locking knob as shown in
the image. Set the camera position
according to your requirement and tighten
the knob back.
NOTE:
It has an Arca Swiss compatible camera
plate clamp that moves up and down on a
scaled slide way, secured with a control knob.
