PROAIM CH-FS7-TBK Page 3 Instruction Manual Download

Page: 3 / 7

Camtree Hunt Shoulder Kit



You can also attach it with your tripod
mounting plate with mounting holes.



Attach the base plate with your VCT-U14

plate

(NOT INCLUDED)

and mount it on tripod.

Tighten well to secure it.

ASSEMBLING

YOUR SHOULDER KIT

NOTE:

The base plate is compatible with

VCT-U14 plate or 1/4”-20 & 3/8”-16 .

ATTACHING WITH VCT-U14 PLATE

ATTACHING DIRECT WITH 1/4”-20 &
3/8”-16 TRIPOD MOUNTING HOLES.

Summary of Contents for CH-FS7-TBK

Page 1: ...No part of this document may be reproduced stored in a retrieval system or transmitted by any form or by any means electronic mechanical photocopying recording or otherwise except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher ...

Page 3: ...holes Attach the base plate with your VCT U14 plate NOT INCLUDED and mount it on tripod Tighten well to secure it ASSEMBLING YOUR SHOULDER KIT NOTE The base plate is compatible with VCT U14 plate or 1 4 20 3 8 16 ATTACHING WITH VCT U14 PLATE ATTACHING DIRECT WITH 1 4 20 3 8 16 TRIPOD MOUNTING HOLES ...

Page 4: ...front of base plate and tighten the knob Insert 150mm female rods into back of base plate then insert the lens support into the front of rods and tighten the knob to secure it Knob Insert the follow focus on 300mm rods and tighten the side knobs to secure properly ...

Page 5: ...ision controlled manual focus racking Attach the matte box to align the knicker with the lens barrel and tighten the knob ATTACHING MATTE BOX Attach your Rosette Handles with 19mm 15mm Bracket tighten the knob to secure it properly ASSEMBLING YOUR ROSETTE HANDLE SET ...